|
Serial Interface: |
High speed serial port
interface from 9600 to 230400 baud.
|
|
Analog Channels: |
11 analog channels for readings with a range of
0 to 2.5 VDC. Four channels with low offset, precision (1 MOhm impedance) signal
conditioning available. Three jumper selectable input voltage ranges: 0-100mV, 0-2.5V and
0-5V. 10 KOhm impedance for channels without signal conditioning. |
|
Digital Lines: |
24 digital I/O lines, TTL compatible which can
sink/source up to 10 mA each.
|
|
A/D Converter: |
Analog to digital converter with input
multiplexer and 10 or 12 bit resolution. Maximum speed – 400 µS/Sample. 2.5V
precision voltage reference. Automatic sample timing generator.
|
|
PWM: |
Pulse rate from 15 Hz to 15 kHz with variable duty cycle.
24 bit output pulse counter up to 16 million. |
|
Resistance:
|
500 Ohms to 10 MOhms |
|
Capacitance:
|
100pF to 10µF |
|
Period: |
Measurement of period from 65µS to 100mS. Minimum
signal frequency 10 Hz, maximum 15 KHz. On-board pulse clipper allows use with AC signals
from 500 mV rms to 5 V rms. |
|
Stepper Control: |
Step speeds from 16 steps/sec to 8,500
steps/sec. Linear acceleration and deceleration capability. 24 bit position/stepping
register. 4 output signals (pulse, direction, pause, trigger) for full (biphasic and
monophasic) and half step modes. |
|
Power Requirements:
|
7-15 VDC @ 33mA |
|
Physical Characteristics: |
Dimensions (approximate): 10.5 X 6.5 X
2 cm (4"X2.5"X.75") Weight: 75 grams (3 oz).
|
